These engines are old now and we have moved on
so here are a few models
model of the engine mount hole’s left and right side for the 306D1 and 306D2
and the adapter plate for fitting the LT230R to the GS6X37 and Gs6X53 gearboxes
these models are accurate
password as always is in the same page as it always is .
Please credit me or mention me in your social media of you use them so that others can find this
bd
What to read next
- BMW M57 and M57N engine breather 3D printed – use the breather adapter post alongside the 3D model work.
- P38 Autobox comms with the M57 engine – connect the CAD packaging work to the gearbox electronics.
Pasword
see
https://www.beady.com/blog/beady/
Hey! looks like the link is now broken, I have attempted to click on it multiple times with no download or any pop-up. Is it possible I am still able to get the file?
works for me
here is the direct link
http://www.beady.com/BigFileForBlog/M57_engine_parts_3d_models.zip
bd
hi beady very nice job, the ZF rear output shaft possible the FTC5090 possible can used, or the gearboxe spline changed?
no, it will not work with ZF manual box, the splines are wrong
bd
sorry boss is still not ok:
The requested URL /index.php was not found on this server.
2nd go 🙂
tried it on another browser and found the error, must have been caching on my machine
bd
very kind, I will send photos of what I will do, I’m the same guy below…
A thousand thanks
Hello Beady,
The shaft that goes from the GS6x-53 to the LT230 to complement your adapter design, can it be bought, or is it a custom design?
Regards
it was something we made special, but we have passed the designs to https://www.flatcapengineering.co.uk/
contact them they can help you
bd
thanks a lot, this is a big turn, i hope you can link your IG account
Ps: now the link is broken 🙂
dont have a IG account
try the link now, it works for me
Dear Beady,
Can the shaft that connects the GS6x-53 to the LT230 to complement your adapter design be bought from somewhere, or is it a custom part?
Regards